Portable but powerful atomiser spray – suitable for use with XtraProtect. This easy to use atomiser gun produce a fine mist that can be used to sanitise surfaces in a range of settings. Perfect for
…and anywhere that you need a practical misting solution to enhance your cleaning and sanitising. Simply charge the gun, fill the large, 800ml reservoir with XtrProtect sanitser and then squeeze the trigger. The gun will produce a very fine, perfectly distributed, mist that can be used on any suitable surface.
£35.99 + VAT
XtraProtect all purpose sanitiser eliminates bacteria within 30 seconds of application for long lasting elimination of bacteria, viruses and mildew. Certified to BSEN:1276/14476 and proven to kill MRSA, E-coli, Norovirus and Coronavirus. Suitable for use where bacteria and viruses accumulate and a thorough clean is paramount, XtraProtect offers residual protection for up to eight days.
Add 60mls of concentrate to 750mls of cold water and shake the mixture. Use with a foaming nozzle. When a fresh supply of XtraProtect is required to be made, discard remaining diluted solution, rinse the container and make a fresh 750ml bottle. Shake the mixture and repeat.
Spray the surface with diluted XtraProtect, leave for 30 seconds and wipe with an XtraFibre cloth. Where there are stubborn marks use XtraWeb agitator to remove, before wiping clean with an XtraFibre cloth. The result will be a smear-free, undamaged and clean surface with a residual sanitising effect for up to 8 days.
Spray the complete mattress, top, bottom and sides with the XtraProtect, leave to dry then make the bed.
IMPORTANT: Test a small hidden area of the carpet or fabric with the XtraProtect to check for the colour fastness of the dyes used in manufacture.
Spray area of the stain with a minimum amount of XtraProtect. If it’s a small area, agitate with an XtraWeb agitator and soak up any excess moisture by dabbing with an XtraFibre cloth. If it’s a larger area, agitate with our XtraScrub Pro. If the stain is not completely removed, repeat the procedure.
Spray the whole of the visible area to be cleaned with XtraProtect. This will prevent the formation of the water mark rings. Agitate gently with an XtraWeb agitator and, if necessary, spray stained areas with more XtraProtect and further agitate until stain disappears. Allow to dry naturally.